FANDOM


Essentia Transfusion is a research option found under the Alchemy tab that can be researched after Infusion and Automated Alchemy have been researched. Once researched, it allows for the creation of the Filling Essentia Transfuser and the Emptying Essentia Transfuser. Both of which allow the moving of Essentia from one source, such as Essentia Tubes or Warded Jars, to another through the air as opposed to physically, such as by Essentia Tubes or hand, by using one or both of the aforementioned items. Both of which allow for large portions of Essentia Tubes to be removed, which not only may be more aesthetically pleasing, but also conserves space and materials and can remove a lot of labor from transporting Essentia to machines, as they can be filled directly through the Emptying Essentia Transfuser.

Items

Filling Essentia Transfuser

2016-04-23 20.18.46

The crafting recipe for the Filling Essentia Transfuser, as shown in the Thaumonomicon. Please note and excuse the use of a texture pack.

The Filling Essentia Transfuser allows for Essentia in machines or Essentia Tubes to be drawn out and sent through the air to any Emptying Essentia Transfusers or Warded Jars within a 16 block area in front of the Transfuser. The Essentia sent through it will appear gaseous, as it does during Infusion when it is being drawn towards the Infusion Matrix. From there, it will manifest itself in the container it is being sent to and will continue to function as normal. It will fill the nearest available container or receptacle first, so care must be taken as to where receiving points are placed if the desired result is to be achieved. They can be attached directly to Essentia Tubes or Machines capable of outputting Essentia. The Filling Essentia Transfuser can be created at an Arcane Workbench with 2 Brass ingots in the top left and right corners, 4 iron ingots in the middle and bottom left and right sections, an Essentia Tube in the bottom middle section, and Alchemical Construct in the middle section, and a dispenser in the top middle section, along with 75 Aqua and 50 Aer and Ordo Vis.

Emptying Essentia Transfuser

2016-04-23 20.18.47

The crafting recipe for the Emptying Essentia Transfuser, as shown in the Thaumonomicon. Please note and excuse the use of a texture pack.

The Emptying Essentia Transfuser allows for Essentia in machines or Essentia Tubes to be drawn out and drawn through the air towards itself from within a 16 block area in front of the Transfuser. The Essentia drawn through it will appear gaseous, as it does during Infusion when it is being drawn towards the Infusion Matrix. From there, it will manifest itself in the Transfuser it is being drawn to and will continue to function as normal. Emptying Essentia Transfusers will always try to draw the needed Essentia from any source it can access, and as so it is advised to use an Essentia Valve to limit when Essentia can be drawn through the connecting pipes. They can be attached directly to Essentia Tubes or Machines capable of receiving Essentia. The Emptying Essentia Transfuser can be created at an Arcane Workbench with 2 Brass ingots in the top left and right corners, 4 iron ingots in the middle and bottom left and right sections, an Essentia Tube in the bottom middle section, and Alchemical Construct in the middle section, and a hopper in the top middle section, along with 75 Aqua and 50 Aer and Ordo Vis.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.